WELCOME TO ZHUZHOU JIANDA CO., LTD.
Mortar pump use
1, pay attention to the pump bearing temperature, should not exceed the outside temperature of 35 degrees but the highest should not be greater than 75 degrees.
time：
2018-11-14 09:31
1, pay attention to the pump bearing temperature, should not exceed the outside temperature of 35 degrees but the highest should not be greater than 75 degrees.
2. The oil cup should be filled with calcium-based butter to ensure that the bearing can be normal and smooth.
3. The butter in the motor supporting oil cup shall be replaced within one month after the first operation of the pump or 100 hours after the operation, and shall be replaced once after each operation in the future.
4. Check the elastic coupling regularly and pay attention to the temperature rise of the motor bearing.
5. In the process of movement, if noise or unusual sound is found, parking should be checked immediately.
6. The pump shall be checked periodically every 2000 hours of operation. The abrasion of the gap between the impeller and the pump body shall not be too large, such as beyond the replaceable impeller or front cover.
7, pump operation 6 from time to time, should check the machine seal, according to the degree of wear and tear to be repaired or replaced, otherwise it will cause damage to the pump shaft and bearing mortar pump early selection planning importance. Type selection planning has a great influence on the service life and operation stability of mortar pump. A scientific and reasonable selection plan will affect whether your mortar pump can reach the best and efficient operation.
Hot Keywords
Previous Page
Next Page
Call us or leave an email using the contact above. We are happy to advise you further!
ONLINE MESSAGES
CONTACT US
WhatsApp：+86-15673386181
E-mail：sallyjiang@zzjdsy.com
WhatsApp：+86-18607417575
Tel：+86-18607417575
E-mail：pumpparts@zzjdsy.com
IPV4 / IPV6